The AirFit™ X30i is an Oral Nasal CPAP Mask designed to give you the coverage of a full face mask with the added seal and stability of nasal pillows cushions. The tube connects to the frame at the top of your head, keeping it out of the way and allowing you the freedom to sleep the way you want to.
AirFit™ X30i is designed to let you sleep the way you want to. The oral nasal design offers the coverage of a full face cushion and the stability and seal of a nasal pillows cushion, while the top-of-head tube design gives you freedom of movement during sleep. AirFit X30i also features QuietAir venting, easy-to-use, snap-on magnetic clips, and oral and pillows cushions that may be replaced twice a month to help keep your mask in top shape.
Oral nasal mask combines the coverage of a full face cushion with the stability and seal of nasal pillows
Top-of-head connection keeps air tubing out of the way so you have the freedom to sleep in any position
QuietAir™ venting technology is designed to minimize noise and gently disperse exhaled air for less disruption to patients and their bed partners
Magnetic clips mean two simple snaps and your mask is on or off
Quick-release elbow allows you to get up at night and disconnect without removing the mask
Oral and nasal pillows cushions may be replaced up to twice per month for a fresher and more comfortable therapy experience
Sizing Options - Select either the small, standard, or large frame. Standard and large frame fitpacks include the small, medium, and large pillow cushions.
Small frame includes the small and medium pillow cushions only.
Please follow this size guide to determine the most appropriate fit:
Please note: For Medical implants that interact with magnets or metallic implants that are susceptible to magnets, it's advised that this mask is not used since it contains magnetic clips. Please consult with your physician before using these types of masks.
I wanted to add the face mask to the pillows of my previous mask due to dry mouth in the morning. So now no dry mouth but more events per hour and bad mask leaks. I’ve tried to fine tune the mask straps but that didn’t fix the problems. I’m now changed to my previous mask. If you have any adjustment tips l would try them. Today it is just a wast of significant money.
I found the mask difficult to fit properly. I still experience air leaks, even accounting for my beard. It’s also uncomfortable around the ears and significantly noisier than I expected.
The customer service agent was attentive and knowledgeable. She was able to assist and resolve my issues by recommending a different product. Great service. I have recommended to other potential clients
I purchased the ResMed AirFit X30i oral nasal CPAP mask six months ago, and overall I’d rate it as average.
While the design is innovative and feels lightweight, I found it quite difficult to maintain a consistent seal—especially when moving during sleep. This led to frequent adjustments throughout the night, which can be frustrating.
Another downside is the silicone cushion. Compared to other masks I’ve tried, it seems to discolour more quickly and loses its softness and flexibility sooner than expected. This affects both comfort and performance over time.
I replaced the x30i with my tried and true choice from another manufacturer after a month and a half of use.
That said, the mask does have a relatively minimal feel and may work well for people who don’t move much in their sleep. For me, though, the sealing issues and durability concerns hold it back from being a top choice.
Livraison rapide, très bon produit, je n'ai plus nécessaire de porter une mentonnière car je dors souvent la bouche ouverte.
Ce produit me convient parfaitement.
Mask leaks like crazy doesn't matter what you do with it or change i never slept in over a week ,had to go back to my old mask until I find something else not happy at all very disappointed.
I fiddled with the mask throughout the first night fo trying it and had the worst events per hour in over two years. I have not tried it since but will give it another try. The nasal buttons were the thing I couldn’t get used to.
This mask fits better than any previous mask I've tried. The nose piece works perfect for me and I rarely have any air leaking.
This will be my go to mask for sure going forward.
I liked this mask for its mouth and nasal pillows. I’m fine tuning it for the best fit for comfort and air loss. I also like the air connection on the top of the mask as I’m a side sleeper.
I picked up the X30i because the redesigned oral–nasal interface looked like a big step forward. I’d used the F30i when I first started CPAP but could never get a reliable seal, so I eventually switched to another brand that worked better for me.
Seeing the new X30i gave me hope that ResMed had solved those issues. After three nights with it, things are looking good so far. Early days, but I’m optimistic this mask might finally bring me back to ResMed with confidence.
I like the mask, I like the fit and comfort. I am having issues with my machine shutting off in the middle of the night when I wear the mask and it doesn’t do that with the other mask I have. I have tried deleting it and adding it a few times in case I set it up wrong but keep getting the same issue.
I was taking a gamble on this recently newly released mask. I'm a loyal Resmed Airtouch F20 user but the nasal pillows was something I always wanted to try without having to tape my mouth as I tend to breathe in both nose and mouth depending on sleeping position. The online sizing guide is quite accurate if you measure your head properly (measure a few times to be sure). The mask is comfortable, doesn't seem to leak much (tight straps are NOT the way to prevent leaks) and it just feels decent. If I could change 1 thing on this mask is the silicone tends to attract a lot of dust and the tubes that run up along your face seem to stick to my skin and gather dust. The mask is quiet and does what it was designed to do. The fit pack edition gives 3 different sized nasal pillows so it should fit pretty much anyone that measured their head properly.
Shipping was quick, free and well packaged. Been using the mask for over week now and nary a problem.
I find the this mask does not leak air as did the F30i which was getting to the point of replacement. This mask is quite comfortable as far as full face masks can be and I do prefer once again the air intake on top. so far all is good.
I chose this mask to avoid having to tape my moth in addition to to my pillow mask. I am getting used to it but it is bulky and a little awkward to get on and off in the night.
The exhaust air from the mouth piece was too loud and the nasal fitting pressed too firmly against my nose making me feel like I had a blocked nose. I couldn’t breathe freely with the x30i like I can with the F20
The ResMed AirFit X30i Oral Nasal CPAP Mask Starter Pack gives sleepers who breathe through their nose and mouth a new level of comfort and innovation.
The AirFit X30i, one of ResMed's newest hybrid CPAP masks, redefines sleep treatment by combining nasal mask stability with full-face coverage—without the bulk.
Innovative Hybrid Design for Maximum Comfort
The AirFit X30i's simplified oral and nasal interface makes it perfect for minimal-contact mask users who still need mouth coverage.
The ResMed AirFit X30i Oral Nasal CPAP Mask Starter Pack gives sleepers who breathe through their nose and mouth a new level of comfort and innovation. The AirFit X30i, one of ResMed's newest hybrid CPAP masks, redefines sleep treatment by combining nasal mask stability with full-face coverage—without the bulk.
Innovative Hybrid Design for Maximum Comfort
The AirFit X30i's simplified oral and nasal interface makes it perfect for minimal-contact mask users who still need mouth coverage. The under-the-nose cushion fits comfortably beneath your nostrils, while the soft oral cradle gently seals the mouth without adding pressure to the nasal bridge.
This revolutionary design eliminates the need for forehead support or a rigid frame, significantly reducing facial marks and discomfort. It's an ideal solution for side sleepers, stomach sleepers, and anyone who finds full-face masks too invasive.
Top-of-Head Tubing for Enhanced Mobility
Featuring ResMed's signature top-of-head hose connector, the AirFit X30i allows the tubing to rotate freely as you move. Whether you change positions during the night or enjoy reading in bed, this design prevents CPAP hose tangling and drag.
QuietAir™ Venting for Peaceful Sleep
Built-in QuietAir™ venting technology ensures the AirFit X30i mask operates at whisper-quiet levels. This reduces airflow disturbances, allowing you and your partner to enjoy uninterrupted, restful sleep.
Multiple Cushion Sizes for a Customized Fit
The AirFit X30i Starter Pack includes Small, Medium, and Large cushions, providing a personalized fit straight out of the box. The soft, flexible frame and adjustable headgear ensure a secure fit that stays in place all night long.
Why Choose the AirFit X30i Mask?
Hybrid design: Covers both nose and mouth with minimal facial contact
Ideal for mouth breathers and users with nasal congestion
Low-pressure, flexible frame for added comfort
Quiet and mobile performance thanks to top-of-head connection
1. What makes the ResMed AirFit X30i mask unique compared to other CPAP masks?
The AirFit X30i is a hybrid oral nasal mask that combines the comfort of a nasal mask with mouth coverage. Its top-of-head hose design ensures maximum mobility, while its low-profile, minimal-contact frame reduces pressure on the face.
2. Who is the AirFit X30i best suited for?
This mask is ideal for:
Users who breathe through both nose and mouth
Individuals with frequent nasal congestion or allergies
Side and stomach sleepers
Those looking for a low-profile alternative to bulky full-face masks
3. Is the AirFit X30i compatible with all CPAP machines?
Yes. The AirFit X30i is compatible with all standard CPAP, APAP, and BiPAP machines that use a universal 22mm connector.
4. What is included in the AirFit X30i Starter Pack?
The starter pack typically contains:
AirFit X30i mask frame and headgear
Multiple cushion sizes (Small, Medium, Large)
QuickFit™ headgear clips
Instruction manual for setup and cleaning
5. How do I clean and maintain the AirFit X30i mask?
Wash the mask parts regularly with mild soap and warm water. Rinse thoroughly and allow to air dry. Replace the cushions every 1–2 months for best hygiene and optimal performance.
6. Can I buy the AirFit X30i without a prescription in Canada?
Yes. In Canada, you can purchase the AirFit X30i Oral Nasal Mask online without a prescription from authorized retailers such as Air Voel.
7. Where can I buy the AirFit X30i mask in Canada?
You can purchase the AirFit X30i CPAP Mask Starter Pack directly from Air Voel Canada, an authorized ResMed retailer offering fast delivery and expert customer support.
The AirFit X30i CPAP Mask gives you flexibility, comfort, and confidence every night. Upgrade your sleep therapy now.
Skip to content
